Email:sales@filter-supplier.comTAGUTI INDUSTRIAL LIMITED

TAGUTI INDUSTRIAL LIMITED

Product Categories
Contact

Contact: Ray Zhang
Tel: +86-512-89992824
Fax: +86-512-65217996
E-mail: edm-china@hotmail.com

Add: The 19th floor, Easey Comm. Bldg., 253-261 Hennessy Road, Wanchai, Hong Kong
Postcode: 999077

Taiwan Series For EDM Purchase Time Need To Pay Attention To Matters

Taiwan Series for EDM purchase time need to pay attention to matters
In the choice of Taiwan Series for EDM when we in addition to Taiwan Series for EDM of price factors we also need to take into account these aspects:
Selection of industrial acidity meter
Online Taiwan Series for EDM, also known as industrial acidity meter, it is a high-precision ph instrument, buy Taiwan Series for EDM of acidity meter to pay special attention to a suitable PH pH meter can extend the Taiwan Series for EDM of service life, the user please Be sure to confirm the following parameters before ordering:
1. Detection of media (including media composition, concentration, turbidity and other conditions)
2. Detect the medium temperature and pressure
3. Probe installation method
4. Probe signal line length (standard configuration 10m)
5. Header use environment
Precautions:
Taiwan Series for EDM / Industrial Taiwan Series for EDM / Online Taiwan Series for EDM / pH meter price / online pH meter / industrial acidity meter Note:
1. Whether the medium contains corrosive substances, the concentration is how much (strong acid and alkali need to use a dedicated probe), Note: If the use of hydrofluoric acid need to use a dedicated anti-HF probe.
2. Medium temperature and pressure, the general conditions of choice within the 0-80 ℃ within the probe, such as high temperature must choose high temperature probe. Pressure pressure is generally 0.6mpa, such as high pressure to be equipped with high pressure probe.
3. Probe installation: submerged installation, sidewall installation, pipe installation, flange installation, floating installation, flow-type installation.
4. Probe sensor (Taiwan Series for EDM) from the pH display instrument is the best distance between 30 meters, the standard is 10m, such as more than 30 meters need to configure the signal amplifier or secondary instrument.
Taiwan Series for EDM, also known as PH probe, Taiwan Series for EDM with the measured material in contact with the part of the Taiwan Series for EDM of potential devices used to measure.
The Taiwan Series for EDM used in the potential analysis method is called the original battery. The original battery is a system, its role is to make the chemical reaction energy into electricity. Taiwan Series for EDM use maintenance Note:
1. Taiwan Series for EDM must be calibrated (at least 2 points) with standard pH at known pH before measurement.
2. After each calibration and measurement, the Taiwan Series for EDM should be cleaned with distilled water or deionized water before the next operation, and the Taiwan Series for EDM should be cleaned with the test solution.
3. When Taiwan's Taiwan Series for EDM of sheaths are removed, Taiwan's Taiwan Series for EDM of sensitive glass bulbs should be brought into contact with hard objects, since any damage or wiping causes the Taiwan Series for EDM to fail.
4. The end of the measurement, the Taiwan Series for EDM of protective sets in time, Taiwan Series for EDM should be placed in a small amount of saturated KCL liquid to keep Taiwan's Taiwan Series for EDM of bulb wet, avoid soaking in distilled water.
5. Composite Taiwan Series for EDM of external reference supplement solution for the 3mol / L potassium chloride solution, the replenisher can be added from the Taiwan Series for EDM top hole, composite Taiwan Series for EDM is not used, covered with rubber stopper, to prevent replenishment dry, online Taiwan Series for EDM is generally gel, so do not need to add electrolyte.
6. Taiwan Series for EDM of terminals must be kept clean and dry, absolutely prevent the output short-circuit at both ends, otherwise it will lead to measurement inaccurate or failure.
7. Taiwan Series for EDM should be with the input impedance of the Taiwan Series for EDM ≥ 3 × 1011Ω matching, so that it maintains good characteristics.
8. Taiwan Series for EDM should avoid long-term immersion in distilled water, protein solution and acidic fluoride solution.
9. Taiwan Series for EDM to avoid contact with silicone oil.
10. Taiwan Series for EDM after long-term use, if the slope is slightly reduced, you can Taiwan Series for EDM of the bottom soak in 4% HF hydrofluoric acid (3 ~ 5) s, washed with distilled water, and then 0.1mol l / L Hydrochloric acid solution soaked, so that the new, the best replacement Taiwan Series for EDM.
11. In the measured solution, such as containing easily contaminated sensitive bulb or plugging fluid boundary material and the Taiwan Series for EDM passivation, there will be a slope reduction, showing the phenomenon of reading are not allowed. If this phenomenon occurs, it should be based on the nature of pollutants, with the appropriate solution cleaning, Taiwan Series for EDM of complex new.

Copyright © Taguti Industrial Limited All rights reserved.edm filter
QR Code