Email:sales@filter-supplier.com TAGUTI INDUSTRIAL LIMITED

TAGUTI INDUSTRIAL LIMITED

Product Categories
Contact

Contact: Ray Zhang
Tel: +86-512-89992824
Fax: +86-512-65217996
E-mail: edm-china@hotmail.com

Add: The 19th floor, Easey Comm. Bldg., 253-261 Hennessy Road, Wanchai, Hong Kong
Postcode: 999077

Taiwan Series For EDM Processing Center Processing Efficiency Is High?

Taiwan Series for EDM processing center processing efficiency is high?
Over the past decade, due to the tool, drive, control and machine tools and other technologies continue to progress, Taiwan Series for EDM processing and efficient processing, especially high-speed hard milling has been in the mold manufacturing industry has been widely used and promoted, the traditional spark Processing on many occasions has been replaced by high-speed hard milling. It is not only greatly improved the machining precision and surface quality of the mold by high-speed hard milling, but also greatly reduces the processing time and simplifies the production process, thus greatly reducing the mold manufacturing Cycle, reducing the mold production costs.
Taiwan Series for EDM of processing center to improve the performance of the mold manufacturing industry is efficient and high precision machining mold an important prerequisite. Driven by the driving technology, the emergence of structural innovation, excellent performance of many different types of Taiwan Series for EDM processing center. In the late 1990s, the three-axis Taiwan Series for EDM machining center has been developed to the five-axis Taiwan Series for EDM processing center.
Taiwan Series for EDM machining center is the spindle speed is high (generally 15000rpm above), fast moving speed (generally 60m / min or more), cutting speed (generally 24m / min or more), so the processing efficiency, good finish, the workpiece by cutting Force effect deformation small. Suitable for cutting thin-walled parts, widely used in aerospace, military, medical equipment and other fields.
High-speed spindle is Taiwan Series for EDM of processing center one of the most critical components. The current spindle speed in the 20000 ~ 40000r / min processing center more and more popular, some European Taiwan Series for EDM machining center spindle speed has reached 60000r / min, speed up to 100000r / min above the high-speed spindle is also under development. Taiwan Series for EDM of processing center speed, horsepower, dynamic balance, rigidity, taper hole and thermal deformation characteristics of Taiwan Series for EDM of machining center rigidity and thermal stability have a considerable impact. This requires Taiwan Series for EDM machining center spindle and motor into one, made of spindle, to achieve no direct link between the intermediate links to reduce the transmission parts, with higher reliability.
As long as a clamping in the rotary table, you can box (except the top and bottom) outside the four faces milling, boring, drilling, tapping and other processing. (Such as the degree of parallelism between the holes, the verticality of the hole and the end face, the verticality of the end face and the bottom surface, etc.), and the holes and cavities of the holes and cavities And the base surface (bottom) with strict dimensional accuracy requirements, in Taiwan Series for EDM of machining centers through a clamping process, easy to be guaranteed, suitable for batch processing of the workpiece.
Taiwan Series for EDM machining center spindle is set horizontally. General Taiwan Series for EDM machining center has three to five coordinate axes, often equipped with a rotary shaft (or rotary table), Taiwan Series for EDM processing center knife library capacity is generally large, and some knife library can store hundreds of tools The Taiwan Series for EDM of processing center structure is more complex than the vertical processing center, volume and covers an area of large, the price is higher.
Taiwan Series for EDM machining center program debugging, as vertical processing center intuitive, easy to observe, the workpiece inspection and measurement is also inconvenient, and complex parts of the processing program debugging time is normal processing several times, so the number of processed parts More, the average time each machine occupies less, so with Taiwan Series for EDM processing center for batch processing is cost-effective. But it can achieve the ordinary equipment is difficult to achieve the accuracy and quality requirements, so some of the high precision requirements, other equipment can not meet the accuracy requirements of the workpiece, in particular, some space surface and complex shape of the workpiece, even a single production, Processing in Taiwan Series for EDM processing center. This shows that the processing center that is efficient, high-quality automated production equipment, but also to overcome the technical problems of the equipment.

Copyright © Taguti Industrial Limited All rights reserved.edm filter
QR Code