Email:sales@filter-supplier.comTAGUTI INDUSTRIAL LIMITED

TAGUTI INDUSTRIAL LIMITED

Product Categories
Contact

Contact: Ray Zhang
Tel: +86-512-89992824
Fax: +86-512-65217996
E-mail: edm-china@hotmail.com

Add: The 19th floor, Easey Comm. Bldg., 253-261 Hennessy Road, Wanchai, Hong Kong
Postcode: 999077

How Do You Determine The Cutting Tools For The Taiwan Series For EDM Center?


How do you determine the cutting tools for the Taiwan Series for EDM center? Regardless of whether the Taiwan Series for EDM center is rough or finished, the appropriate cutting tool should be selected to ensure the accuracy of the machining. How should the cutting tool be selected when selecting the cutting tool for the Taiwan Series for EDM center?
Determine the cutting of the Taiwan Series for EDM center to do the following:
(1) carefully study the Taiwan Series for EDM center mold groove.
(2) Define the minimum fillet radius requirements and the maximum cavity depth.
(3) preliminary estimate the total amount of material to be removed. It is very important to use conventional methods and tools for roughing and semi-finishing of large-sized molds. It is very important to understand this. The use of high-speed cutting method for finishing will achieve higher productivity, as is the case for large-size molds. This is because the material removal rate at high speed cutting is lower than that of conventional cutting, except for cutting of aluminum and nonferrous metals.
(4) When using the Taiwan Series for EDM center for high-speed cutting or cutting on a mold with a high groove accuracy, the machining strategy should be rough, semi-finished, finished and super-machined on a dedicated machine finishing. The reason is obvious in a machine for all types of work and work load, in order to keep a good groove accuracy is completely impossible.
Factors that affect the normal use of Taiwan Series for EDM centers. Taiwan Series for EDM Center is a mechanical industry in the use of a wide range of machinery and equipment, he can achieve a piece of the workpiece after the installation of the program according to the set of different tools, more suitable for processing box parts, but in the use of the process , The normal use of the Taiwan Series for EDM Center will also be affected by a number of factors. Let's take a look at the factors that affect the normal use of the Taiwan Series for EDM.
Factors that affect the normal use of Taiwan Series for EDM centers
Install the Taiwan Series for EDM Center environment
Taiwan Series for EDM centers should be installed away from the source, do not be exposed to direct sunlight, no heat radiation and no wet places. If there is a source near the place where Taiwan Series for EDM is installed, a shock wave should be provided around the Taiwan Series for EDM center. If you do not set the shock wave will directly affect the Taiwan Series for EDM center processing accuracy and stability, time will affect the electronic components of poor contact, failure, affecting the Taiwan Series for EDM center reliability.
Strict control of Taiwan Series for EDM center voltage and current
Taiwan Series for EDM centers are generally installed in the processing plant, and processing plant machinery and equipment, will inevitably lead to large fluctuations in the grid. Therefore, the location of the Taiwan Series for EDM installation must strictly control the voltage and current of the power supply. The voltage and current of the power supply must be controlled within the range of Taiwan Series for EDM. Be sure to keep the voltage and current of the power supply stable. Affect the normal work of Taiwan Series for EDM.
Temperature and humidity will directly affect the Taiwan Series for EDM center
Taiwan Series for EDM centers are generally under 30 ° C to work properly. In general, the Taiwan Series for EDM center distribution cabinets are equipped with exhaust fans and chillers to ensure that the electronic components and central processing are in a steady state Work under. If the temperature and humidity are too high will lead to lower control unit component life, resulting in Taiwan Series for EDM center failure for no reason. Humidity increases, the dust will increase in the integrated circuit board directly lead to poor contact and short circuit failure.

Copyright © Taguti Industrial Limited All rights reserved.edm filter
QR Code